Home           Contact us           FAQs           
   Journal Page   |   Aims & Scope   |   Author Guideline   |   Editorial Board   |   Search
2013 (Vol. 5, Issue: 08)
Article Information:

Study on Integration Treatment Technology of Waste Emulsion from Machining Processing

Xin-dong Li and Wan-fu Huang
Corresponding Author:  Xin-dong Li 

Key words:  Membrane bio-reactor, membrane separation, micro electrolysis, waste emulsion, , ,
Vol. 5 , (08): 982-985
Submitted Accepted Published
September 30, 2012 December 06, 2012 August 05, 2013

The study studied the treatment technology of high concentration emulsion wastewater in metal machining plant. By analyzing the properties of emulsion wastewater, the author used the combination process of membrane technology + Fe-C micro-electrolysis + membrane bioreactor to treat the wastewater. Through the ceramic membrane, the removal rate of CODCr can reach 95%. Fe-C micro-electrolysis treatment can improve the biodegradability of wastewater, lastly through the membrane bioreactor treatment systems; CODCr of the effluent is less than 100 mg/L, which meets the requirements of The First Grade of the National Discharge Standard (GB8978-1996).
Abstract PDF HTML
  Cite this Reference:
Xin-dong Li and Wan-fu Huang, 2013. Study on Integration Treatment Technology of Waste Emulsion from Machining Processing.  Advance Journal of Food Science and Technology, 5(08): 982-985.
    Advertise with us
ISSN (Online):  2042-4876
ISSN (Print):   2042-4868
Submit Manuscript
   Current Information
   Sales & Services
   Contact Information
  Executive Managing Editor
  Email: admin@maxwellsci.com
  Publishing Editor
  Email: support@maxwellsci.com
  Account Manager
  Email: faisalm@maxwellsci.com
  Journal Editor
  Email: admin@maxwellsci.com
  Press Department
  Email: press@maxwellsci.com
Home  |  Contact us  |  About us  |  Privacy Policy
Copyright © 2009. MAXWELL Science Publication, a division of MAXWELLl Scientific Organization. All rights reserved