Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology


Kinematics Analysis and Modeling of 6 Degree of Freedom Robotic Arm from DFROBOT on Labview

1Hanan A.R. Akkar and 2Ahlam Najim A-Amir
1Department of Electrical Engineering, University of Technology
2Department of Electrical Engineering, Al-Mustansiriya University, Baghdad, Iraq
Research Journal of Applied Sciences, Engineering and Technology  2016  7:569-575
http://dx.doi.org/10.19026/rjaset.13.3016  |  © The Author(s) 2016
Received: May ‎5, ‎2016  |  Accepted: June ‎7, ‎2016  |  Published: October 05, 2016

Abstract

The aim of this study is to analyze the robot arm kinematics which is very important for the movement of all robotic joints. Also they are very important to obtain the indication for controlling or moving of the robot arm in the workspace. In this study the kinematics of ROB0036 DFROBOT Arm will be accomplished by using LabVIEW. Finding the parameters of Denavit-Hartenberg representation, the kinematic equations of motion can be derived which solve the problems of automatic control of the 6 revolute joints DFROBOT manipulator. The kinematics solution of the LabVIEW program was found to be nearest to the robot arms actual measurements.

Keywords:

DFROBOT 6DOF robot arm, forward kinematics, inverse kinematics, LabVIEW, robot manipulator,


References

  1. Craig, J.J., 2005. Introduction to Robotics: Mechanics and Control. 3rd Edn., Pearson, Prentice Hall, Upper Saddle River, NJ, USA.
    Direct Link
  2. Iqbal, J., M.R.U. Islam and H. Khan, 2012. Modeling and analysis of a 6 DOF robotic arm manipulator. Can. J. Electr. Electron. Eng., 3(6): 300-306.
  3. Koyuncu, B. and M.S. Guzel, 2007. Software development for the kinematic analysis of a Lynx 6 robot arm. Int. J. Comput. Electr. Automat. Control Inform. Eng., 1(6): 1575-1580.
  4. Kumar, K.K., A. Srinath, G. Jugalanvesh, R. Premsai and M. Suresh, 2013. Kinematic analysis andsimulation of 6Dof KukaKr5 robot for welding application. Int. J. Eng. Res. Appl., 3(2): 820-827.
  5. Mohammed, A.A. and M. Sunar, 2015. Kinematics modeling of a 4-DOF robotic arm. Proceeding of the IEEE International Conference on Control Automation and Robotics. Singapore, pp: 87-91.
  6. Qassem, M.A., I. Abuhadrous and H. Elaydi, 2010. Modeling and simulation of 5 DOF educational robot arm. Proceeding of the 2nd International Conference on Advanced Computer Control (ICACC, 2010). Shenyang, pp: 569- 574.
  7. Singh, E.H., N. Dhillon and E.I. Ansari, 2015. Forward and inverse kinematics solution for six DOF with the help of robotics tool box in matlab. Int. J. Appl. Innov. Eng. Manage., 4(3): 17-22.
  8. Spong, M.W., S. Hutchinson and M. Vidyasagar, 2005. Robot Modeling and Control. 1st Edn., John Wiley and Sons Inc., New York.
  9. Tahseen, F.A., 2013. Forward kinematics modeling of 5DOF stationary articulated robots. Eng. Tech. J., 31(3): 500-513.

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.

ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved