Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Mathematics and Statistics


Manipulation of Slurry Density of Red Mud Clay in the Separation of Fine/Coarse Palm Kernel Shell

C.I.O Kamalu, K.N. Nwaigwe and M.S. Nwakaudu
School of Engineering and Engineering Technology, Federal University of Technology, P.M.B. 1526, Owerri, Nigeria
Research Journal of Mathematics and Statistics  2015  3:27-32
http://dx.doi.org/10.19026/rjms.7.1634  |  © The Author(s) 2015
Received: October 06, 2012  |  Accepted: March ‎25, ‎2015  |  Published: August 25, 2015

Abstract

A work on the manipulation of slurry density of red mud clay in the separation of fine/coarse palm kernel shell is presented. Measured mass quantities of clay were added intermittently into 100 L of water and its density calculated and recorded. Different mass quantities of kernel/shell mixture were poured into the mud clay slurry, and stirred. The part of Kernel/shell mixture that floated were scooped off and the Kernel hand-picked and weighed. The plot of weight of floated kernel against specific gravity of the slurry shows a sigmoidal profile (asymptotic to sp. gravity axis). Curve fitting the profile with the superimposition of a model eqn on it gives an R2 of 99.85% using MATLAB Toolbox 7.0. The derived equation for floating kernel mass against mud slurry density fitted the profile with R2 of 99.85%. At near stokes’ regime i.e., n = 2/3, the sp. Gravities of kernel and shell as well as shell diameter are 0.8349, 1.037 and 1.04 cm respectively, while, at Newton’s regime they are 0.7242, 0.9082 and 1.114cm respectively. As the sp. gravity of the mud clay slurry begins to approach 2.81 the floated kernel mass begins to be constant and highest.

Keywords:

Coarse, fine, float, kernels, mud slurry density, mass, shells separation,


References

  1. Akubuo, C. and J. Eke, 2009. Palm kernel/shell separator. Mechanical Engineering Department, University of Nigeria, Nsukka, pp: 1-3.
  2. Chhabra, R.P. and I.F. Richardson, 1999. Non-Newtonian Flow in the Process Industries. Butterworth-Heinemann, London.
    PMCid:PMC1571710    
  3. Dewsbury, K.H., D.G. Karamaner and A. Margaritis, Aicheji 46 (2000) 46. Dynamic behavior of freely using buoyant solid sphere in non-Newtonian liquids.
    CrossRef    
  4. Graham, D.I. and T.E.R. Jones, 1954. 465. Settling and transport of spherical particles in power-law fluids at finite Reynolds number. J. Non-Newtonian Fluid Mech., 54: 465-488.
    CrossRef    
  5. Kamalu, C.I.O., 2008. The design of palm kernel/shell separators using hydrocyclone concepts. Chemical Engineering department, FUTO. pp: 1-3.
  6. Khan, A.R. and J.F. Richardson, 1987. The resistance to motion of a solid sphere in a fluid. Chem. Eng. Comm., 62: 135.
    CrossRef    
  7. Richardson, J.F., J.H. Harker and J.R. Backhurst, 2006. Chemical Engineering. Butterworth Heinemnn, An Imprint of Elsevier, India, Vol. 2.
  8. Richardson, J.F. and J.H. Harker, 2003. Chemical Engineering. 5th Edn., Vol. 2.

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.

ISSN (Online):  2040-7505
ISSN (Print):   2042-2024
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved