|
Abstract
|
Article Information:
A High Voltage-lift Efficient Isolated Full Bridge DC-DC Converter
A. Gopi and R. Saravanakumar
Corresponding Author: A. Gopi
Submitted: November 11, 2013
Accepted: December 05, 2013
Published: May 10, 2014 |
Abstract:
|
The aim of this study is to propose a high voltage lift isolated full bridge dc-dc converter. The proposed converter consists of an isolation transformer a low turn ratio to obtain high step up voltage gain. The secondary of the transformer connected with two boosting capacitors which connects parallel when power switches switch on period and discharged in series during the switch off period. In addition full bridge converter on primary side consists of clamping diode and capacitor, leakage energy is recycled there by improving conversion efficiency. The proposed circuits simulated using PSIM software form input voltage of 48V, an output of 410 V obtained. These results and operations experimented and validated by implementing in hardware model at 20/40 Vdc, 20 Watts.
Key words: Full bridge converter, PSIM software, voltage gain , voltage lift , , ,
|
|
Abstract
|
PDF
|
HTML |
|
Cite this Reference:
A. Gopi and R. Saravanakumar, . A High Voltage-lift Efficient Isolated Full Bridge DC-DC Converter. Research Journal of Applied Sciences, Engineering and Technology, (18): 3860-3866.
|
|
|
|
 |
ISSN (Online): 2040-7467
ISSN (Print): 2040-7459 |
 |
| Information |
|
|
|
|
| Sales & Services |
|
|
|
|
