Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Research Journal of Applied Sciences, Engineering and Technology

    Abstract
2014(Vol.7, Issue:17)
Article Information:

Effect of Epoxy Resin Mixtures on the Physical and Mechanical Properties of Sand

Costas A. Anagnostopoulos, Panagiotis Kandiliotis, Malvina Lola and Sarafianos Karavatos
Corresponding Author:  Costas A. Anagnostopoulos 
Submitted: October 19, 2013
Accepted: October 25, 2013
Published: May 05, 2014
Abstract:
The use of new materials for soil strengthening is crucial for geotechnical engineering, especially in foundation construction. The main objective of this study was to investigate the potential use of two-component water-soluble epoxy resin to improve the physical and mechanical properties of medium sand, because the efficacy of these resins on soil strengthening has not yet been properly investigated. The experiments were conducted using resins with different epoxy resin-to-water ratios. The results of this study indicate that the epoxy resins improve the physical and mechanical properties of the sand significantly and if successfully grouted into a formation, the resins could provide a suitable solution for the stabilization of the foundation material. In separate experiments, electro osmotic treatment of sand/resin mixtures was conducted with the aim of identifying the effectiveness of electro kinetic method on the early strength development of sand/resin mixtures. From the results it was observed that the electroosmotically treated specimens appeared to have much greater strength enhancement than the one of the untreated specimens.

Key words:  Chemical grouting, electro osmosis, epoxy resin, , , ,
Abstract PDF HTML
Cite this Reference:
Costas A. Anagnostopoulos, Panagiotis Kandiliotis, Malvina Lola and Sarafianos Karavatos, . Effect of Epoxy Resin Mixtures on the Physical and Mechanical Properties of Sand. Research Journal of Applied Sciences, Engineering and Technology, (17): 3478-3490.
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved