Home           Contact us           FAQs           
   Journal Page   |   Aims & Scope   |   Author Guideline   |   Editorial Board   |   Search
2013 (Vol. 6, Issue: 11)
Article Information:

Analysis of Dynamic Modeling Method Based on Boundary Element

Xu-Sheng Gan and Ying-Wu Fang
Corresponding Author:  Ying-wu Fang 

Key words:  A machine structure, boundary element method, dynamic modeling, , , ,
Vol. 6 , (11): 2072-2076
Submitted Accepted Published
November 29, 2012 January 17, 2013 July 25, 2013

The aim of this study was to study an improved dynamic modeling method based on a Boundary Element Method (BEM). The dynamic model was composed of the elements such as the beam element, plate element, joint element, lumped mass and spring element by the BEM. An improved dynamic model of a machine structure was established based on plate-beam element system mainly. As a result, the dynamic characteristics of a machine structure were analyzed and the comparison of computational results and experimentalís showed the modeling method was effective. The analyses indicate that the introduced method inaugurates a good way for analyzing dynamic characteristics of a machine structure efficiently.
Abstract PDF HTML
  Cite this Reference:
Xu-Sheng Gan and Ying-Wu Fang, 2013. Analysis of Dynamic Modeling Method Based on Boundary Element.  Research Journal of Applied Sciences, Engineering and Technology, 6(11): 2072-2076.
    Advertise with us
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Current Information
   Sales & Services
   Contact Information
  Executive Managing Editor
  Email: admin@maxwellsci.com
  Publishing Editor
  Email: support@maxwellsci.com
  Account Manager
  Email: faisalm@maxwellsci.com
  Journal Editor
  Email: admin@maxwellsci.com
  Press Department
  Email: press@maxwellsci.com
Home  |  Contact us  |  About us  |  Privacy Policy
Copyright © 2009. MAXWELL Science Publication, a division of MAXWELLl Scientific Organization. All rights reserved