Home           Contact us           FAQs           
 
   Journal Page   |   Aims & Scope   |   Author Guideline   |   Editorial Board   |   Search
    Abstract
2013 (Vol. 5, Issue: 08)
Article Information:

Research on Reliability Modelling Method of Machining Center Based on Monte Carlo Simulation

Chuanhai Chen, Zhaojun Yang, Fei Chen and Qingbo Hao
Corresponding Author:  Fei Chen 

Key words:  Machining center, monte carlosimulation, radial basis function, reliability modelling, Weibull distribution, ,
Vol. 5 , (08): 2671-2676
Submitted Accepted Published
September 14, 2012 October 19, 2012 March 15, 2013
Abstract:

The aim of this study is to get the reliability of series system and analyze the reliability of machining center. So a modified method of reliability modelling based on Monte Carlo simulation for series system is proposed. The reliability function, which is built by the classical statistics method based on the assumption that machine tools were repaired as good as new, may be biased in the real case. The reliability functions of subsystems are established respectively and then the reliability model is built according to the reliability block diagram. Then the fitting reliability function of machine tools is established using the failure data of sample generated by Monte Carlo simulation, whose inverse reliability function is solved by the linearization technique based on radial basis function. Finally, an example of the machining center is presented using the proposed method to show its potential application. The analysis results show that the proposed method can provide an accurate reliability model compared with the conventional method.
Abstract PDF HTML
  Cite this Reference:
Chuanhai Chen, Zhaojun Yang, Fei Chen and Qingbo Hao, 2013. Research on Reliability Modelling Method of Machining Center Based on Monte Carlo Simulation.  Research Journal of Applied Sciences, Engineering and Technology, 5(08): 2671-2676.
    Advertise with us
 
ISSN (Online):  2040-7467
ISSN (Print):   2040-7459
Submit Manuscript
   Current Information
   Sales & Services
   Contact Information
  Executive Managing Editor
  Email: admin@maxwellsci.com
  Publishing Editor
  Email: support@maxwellsci.com
  Account Manager
  Email: faisalm@maxwellsci.com
  Journal Editor
  Email: admin@maxwellsci.com
  Press Department
  Email: press@maxwellsci.com
Home  |  Contact us  |  About us  |  Privacy Policy
Copyright © 2009. MAXWELL Science Publication, a division of MAXWELLl Scientific Organization. All rights reserved